Back to Standards Coverage
Electrical Technology I
Architecture and Construction · Texas TEKS
Architecture and Construction
Electrical Technology I
TEKS Code: §127.109 · Credit: One Credit · Duration: 18-36 weeks
Coverage: 77 of 86 sub-standards aligned to Core-LX badges (90%).
| Strand | Standard ID | Standard Statement | Covered? | CLX Match List |
|---|---|---|---|---|
| 1. The Student Identifies The Issues Associated With Electrical Hazards Found On A Jobsite... | 1.1.1 | demonstrate safe working procedures in a construction environment | ✅ | • Certify ED : Carpentry (Video & VR) : Carpentry - Unit 01 - Fundamentals of Carpentry Safety and Tool Use • Pointful Education : Building Maintenance Technologies : BuildMT 01: Health, Safety, and Environmental Management Systems • Certify ED : Plumbing (Video & VR) : Plumbing - Unit 07 - Workplace Safety in the Plumbing Industry • xennialdigital user : VR Intro to Construction : VR Intro to Construction • Core-LX : Residential Carpentry : 01 Job Site Safety |
| 1.1.2 | explain the purpose of the Occupational Safety and Health Administration (OSHA) and how it promotes safety on the job | ✅ | • Certify ED : Construction Safety (OSHA) (Video & VR) : Construction Safety (OSHA) - Unit 01 - Introduction to OSHA • Certify ED : Carpentry (Video & VR) : Carpentry - Unit 01 - Fundamentals of Carpentry Safety and Tool Use • Pointful Education : Building Maintenance Technologies : BuildMT 01: Health, Safety, and Environmental Management Systems • TPC : TPC Industrial Fundamentals : 109 Industrial Safety and Health • Certify ED : Construction Safety (OSHA) (Video & VR) : Construction Safety (OSHA) - Unit 06 - Enforcing OSHA Standards | |
| 1.1.3 | identify electrical hazards and how to avoid or minimize them in the workplace; | ✅ | • Certify ED : Construction Safety (OSHA) (Video & VR) : Construction Safety (OSHA) - Unit 24 - Electrical Safety and Power Tools • Certify ED : Construction Safety (OSHA) (Video & VR) : Construction Safety (OSHA) - Unit 14 - Electrical Protection • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 • Almon, Inc. : Electrical : Basic Electrical 1 | |
| 1.1.4 | explain safety issues concerning lockout and tagout procedures, personal protection using assured grounding and isolation programs, confined space entry, respiratory protection, and fall protection | ✅ | • Workforge Publisher : Health & Safety : SAF-1021 Lockout Tagout • TPC : TPC Electrical Training Courses : 205.1 Electrical Safety and Protection - v2 • Core-LX : NCCER 31 - Confined Space Safety for Plumbers NCCER Plumbing Level 1 : NCCER 31 - Confined Space Safety for Plumbers NCCER Plumbing Level 1 • Workforge Publisher : Health & Safety : SAF-1011 Recognizing Respiratory Hazards • Workforge Publisher : Health & Safety : SAF-1018 Fall Prevention | |
| 2. The Student Learns Conduit Bending And Installation. The Student Is Expected To: | 2.1.1 | identify the methods of hand bending conduit | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques • Core-LX : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 |
| 2.1.2 | identify the various methods used to install conduit | ✅ | • Core-LX : All Lessons : NEC Code Navigation, Electrical Drawings, and Box Fill Calculations (pending) | |
| 2.1.3 | use mathematical formulas to determine conduit bends | ✅ | • Core-LX : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 • Core-LX : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 • Core-LX : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 • Core-LX : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 : NCCER 14 - Conduit Bending Mathematics NCCER Electrical Level 1 • Core-LX : NCCER Electrical L1 : Conduit Bending Mathematics (pending) | |
| 2.1.4 | make 90 degree bends, back-to-back bends, offsets, kicks, and saddle bends using a hand bender; | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques • Core-LX : Labs : Conduit Bending: 90-Degree, Back-to-Back, Offset, and Saddle Bends (pending) | |
| 2.1.5 | cut, ream, and thread conduit | ✅ | • TPC : TPC Industrial Fundamentals : 107 Hand Tools • TPC : TPC Industrial Fundamentals : 107 Hand Tools | |
| 3. The Student Gains Knowledge Of The Hardware And Systems Used By An Electrician To Mount... | 3.1.1 | identify and explain the use of threaded fasteners | ✅ | • TPC : TPC Mechanical Systems : 301 Basic Mechanics • TPC : TPC Industrial Fundamentals : 101 Reading Blueprints • Core-LX : Residential Carpentry : 07 Fasteners • TPC : TPC Mechanical Systems : 301 Basic Mechanics • Teach Construction : Basic Tools & Materials for Carpentry and Construction : Fasteners |
| 3.1.2 | identify and explain the use of non-threaded fasteners | ✅ | • Core-LX : Residential Carpentry : 07 Fasteners • Teach Construction : Basic Tools & Materials for Carpentry and Construction : Fasteners • Teach Construction : Basic Tools and Materials in Construction : Basic Tools and Materials: Fasteners • Pointful Education : Building Maintenance Technologies : BuildMT 10: Framing Floor Systems Part II • TPC : TPC Industrial Fundamentals : 108 Portable Power Tools | |
| 3.1.3 | identify and explain the use of anchors | ✅ | • Core-LX : Residential Carpentry : 07 Fasteners • Teach Construction : Basic Tools & Materials for Carpentry and Construction : Fasteners • Teach Construction : Basic Tools and Materials in Construction : Basic Tools and Materials: Fasteners • Pointful Education : Building Maintenance Technologies : BuildMT 10: Framing Floor Systems Part II • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques | |
| 3.1.4 | demonstrate the correct applications for fasteners and anchors; | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques • Core-LX : Residential Carpentry : 07 Fasteners • Teach Construction : Framing - Wall, Floor, Roof : Framing - Wall, Floor, Roof: 09 Roof Framing • Pointful Education : Building Maintenance Technologies : BuildMT 10: Framing Floor Systems Part II • TPC : TPC Industrial Fundamentals : 108 Portable Power Tools | |
| 3.1.5 | install fasteners and anchors | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques • Certify ED : Carpentry (Video & VR) : Carpentry - Unit 10 - Siding and Cabinetry Installation • TPC : TPC Industrial Fundamentals : 108 Portable Power Tools • Teach Construction : Framing - Wall, Floor, Roof : Framing - Wall, Floor, Roof: 09 Roof Framing • Teach Construction : Framing - Wall, Floor, Roof : Framing - Wall, Floor, Roof: 09 Roof Framing | |
| 4. The Student Learns The Electrical Concepts Used In Ohm'S Law Applied To Direct Current ... | 4.1.1 | recognize what atoms are and what atoms are composed of | ✅ | • Core-LX : Chemistry 2e : Chemistry 2e: 02 Atoms Molecules and Ions • Core-LX : Chemistry 2e : Chemistry 2e: 02 Atoms Molecules and Ions • Open Textbooks : Chemistry of Food and Cooking 1 : Chapter 02: Atoms • Open Textbooks : Concepts of Biology : COB: Unit 1: Chapter 02: Introduction to the Chemistry of Life • OpenStax : Chemistry 2e : 2.2 Evolution of Atomic Theory (pending) |
| 4.1.2 | define voltage and identify the ways in which it can be produced | ✅ | • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) • Gittel Grant : Unit 2: Electrical Engineering I : Unit 2: Electrical Engineering I: Lesson 17-18 • Certify ED : HVAC 1 (Video & VR) : HVAC 1 - Unit 03 - Electrical Fundamentals for HVAC Professionals • Core-LX : Physics : Physics: 20 Electric Current Resistance and Ohms Law • Certify ED : HVAC 1 (Video & VR) : HVAC 1 - Unit 04 - Electrical Fundamentals for HVAC Systems | |
| 4.1.3 | explain the difference between conductors and insulators | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 03 - Fundamentals of Electrical Circuits • Gittel Grant : Unit 2: Electrical Engineering I : Unit 2: Electrical Engineering I: Lesson 11-12 • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) • Almon, Inc. : Electrical : Basic Electrical 1 • Certify ED : HVAC 1 (Video & VR) : HVAC 1 - Unit 03 - Electrical Fundamentals for HVAC Professionals | |
| 4.1.4 | define the units of measurement used to measure the properties of electricity | ✅ | • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) • Core-LX : Physics : Physics: 20 Electric Current Resistance and Ohms Law • Certify ED : HVAC 1 (Video & VR) : HVAC 1 - Unit 03 - Electrical Fundamentals for HVAC Professionals • TPC : TPC Electrical Training Courses : 201 Basic Electricity and Electronics • TPC : TPC Electrical Training Courses : 201 Basic Electricity and Electronics | |
| 4.1.5 | explain how voltage, current, and resistance are related to each other | ✅ | • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) • Certify ED : HVAC 1 (Video & VR) : HVAC 1 - Unit 03 - Electrical Fundamentals for HVAC Professionals • Core-LX : Physics : Physics: 20 Electric Current Resistance and Ohms Law • Certify ED : HVAC 1 (Video & VR) : HVAC 1 - Unit 04 - Electrical Fundamentals for HVAC Systems • TPC : TPC Electrical Training Courses : 201 Basic Electricity and Electronics | |
| 4.1.6 | calculate an unknown value using the formula for Ohm's law | ✅ | • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) • TPC : TPC Electrical Training Courses : 201 Basic Electricity and Electronics • TPC : TPC Electrical Training Courses : 201 Basic Electricity and Electronics • Core-LX : Physics : Physics: 20 Electric Current Resistance and Ohms Law • Certify ED : HVAC 1 (Video & VR) : HVAC 1 - Unit 04 - Electrical Fundamentals for HVAC Systems | |
| 4.1.7 | explain the different types of meters used to measure voltage, current, and resistance | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 03 - Fundamentals of Electrical Circuits • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments • TPC : TPC Air Conditioning & Refrigeration Training : 431 The Refrigeration Cycle • TPC : TPC Air Conditioning & Refrigeration Training : 431 The Refrigeration Cycle | |
| 4.1.8 | calculate the amount of power used by a circuit using the power formula | ✅ | • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) • Core-LX : Physics : Physics: 20 Electric Current Resistance and Ohms Law • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits | |
| 4.1.9 | explain the basic characteristics of a series, parallel, and combined series-parallel circuit | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 04 - Fundamentals of Electrical Circuits: Series, Parallel, and Combination Circuits • Certify ED : Electrical (Video & VR) : Electrical - Unit 04 - Fundamentals of Electrical Circuits: Series, Parallel, and Combination Circuits • Certify ED : Electrical (Video & VR) : Electrical - Unit 04 - Fundamentals of Electrical Circuits: Series, Parallel, and Combination Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • Certify ED : HVAC 2 - (Video & VR) : HVAC 2 - Unit 03 - Electrical Fundamentals and Applications in HVAC Systems | |
| 4.1.10 | calculate, using Kirchhoff's current law, the total current in parallel and series-parallel circuits; | ✅ | • Certify ED : HVAC 1 (Video & VR) : HVAC 1 - Unit 04 - Electrical Fundamentals for HVAC Systems • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits | |
| 4.1.11 | find the total amount of resistance in a series, parallel, or combined series-parallel circuit | ✅ | • Core-LX : Physics : Physics: 21 Circuits, Bioelectricity and DC Instruments • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits • TPC : TPC Electrical Training Courses : 202 Batteries and DC Circuits | |
| 5. The Student Gains Knowledge In Selecting, Using, And Safely Maintaining Common Electric... | 5.1.1 | explain how to operate test equipment such as ammeter, ohmmeter, volt-ohm-multimeter, continuity tester, and voltage tester | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) • TPC : TPC Process Control Instrumentation : 280 Safety, Calibration, and Testing |
| 5.1.2 | explain how to read specific test equipment and convert from one scale to another when using specified test equipment | ✅ | • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments • TPC : TPC Process Control Instrumentation : 277 Temperature Measurement • TPC : TPC Process Control Instrumentation : 280 Safety, Calibration, and Testing • Open Textbooks : Introduction to Aerospace Flight Vehicles : IAFV: 02 Preparations | |
| 5.1.3 | explain the importance of proper meter polarity; | ✅ | • TPC : TPC Electrical Training Courses : 206 DC Equipment and Controls • TPC : TPC Air Conditioning & Refrigeration Training : 439 System Troubleshooting • TPC : TPC Air Conditioning & Refrigeration Training : 439 System Troubleshooting • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 | |
| 5.1.4 | explain the difference between digital and analog meters | ✅ | • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments • TPC : TPC Process Control Systems : 283 Data Transmission • TPC : TPC Industrial Electronics : 291 Digital Logic Systems • TPC : TPC Electrical Training Courses : 204.1 Electrical Measuring Instruments | |
| 6. The Student Uses The National Electrical Code. The Student Is Expected To: | 6.1.1 | explain the purpose and history of the National Electrical Code | ✅ | • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • TPC : TPC Electrical Training Courses : 205.1 Electrical Safety and Protection - v2 • TPC : TPC Electrical Training Courses : 205.1 Electrical Safety and Protection - v2 • Core-LX : NCCER Electrical L1 : NEC Code Navigation (pending) |
| 6.1.2 | describe the layout of and explain how to navigate the National Electrical Code | ✅ | • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 | |
| 6.1.3 | describe the purpose of the National Electrical Manufacturers Association and National Fire Protection Association; | ✅ | • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 • Certify ED : Electrical (Video & VR) : Electrical - Unit 02 - Electrical Safety and Emergency Procedures | |
| 6.1.4 | explain the role of testing laboratories | ❌ | no genuine match | |
| 7. The Student Learns The Types And Applications Of Raceways, Wireways, And Ducts. The Stu... | 7.1.1 | describe various types of cable trays and raceways | ❌ | no genuine match |
| 7.1.2 | identify and select various types and sizes of raceways | ✅ | • Core-LX : All Lessons : NEC Code Navigation, Electrical Drawings, and Box Fill Calculations (pending) | |
| 7.1.3 | identify and select various types and sizes of cable raceways | ✅ | • Core-LX : All Lessons : NEC Code Navigation, Electrical Drawings, and Box Fill Calculations (pending) | |
| 7.1.4 | identify and select various types of raceway fittings | ❌ | no genuine match | |
| 7.1.5 | identify various methods used to install raceways | ❌ | no genuine match | |
| 7.1.6 | demonstrate knowledge of National Electrical Code raceway requirements | ✅ | • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 | |
| 7.1.7 | describe procedures for installing raceways and boxes on masonry surfaces, metal stud systems, wood-framed systems, and drywall surfaces; | ✅ | • Pointful Education : Building Maintenance Technologies : BuildMT 12: Framing Walls and Ceilings Part II | |
| 7.1.8 | recognize safety precautions that must be followed when working with boxes and raceways | ❌ | no genuine match | |
| 8. The Student Learns The Types And Applications Of Conductors And Wiring Techniques. The ... | 8.1.1 | demonstrate the various wire sizes using a wire in accordance with American Wire Gauge standards | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation |
| 8.1.2 | identify insulation and jacket types according to conditions and applications | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation | |
| 8.1.3 | describe voltage ratings of conductors and cables | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation | |
| 8.1.4 | read and identify markings on conductors and cables | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • TPC : TPC Industrial Fundamentals : 101 Reading Blueprints | |
| 8.1.5 | use the tables in the National Electrical Code to determine the ampacity of a conductor | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • TPC : TPC Electrical Training Courses : 207 Single-Phase Motors • TPC : TPC Electrical Training Courses : 207 Single-Phase Motors | |
| 8.1.6 | state the purpose of stranded wire | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation | |
| 8.1.7 | state the purpose of compressed conductors | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation | |
| 8.1.8 | describe the different materials from which conductors are made | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Almon, Inc. : Electrical : Basic Electrical 1 | |
| 8.1.9 | describe the different types of conductor insulation | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • TPC : TPC Electrical Training Courses : 201 Basic Electricity and Electronics | |
| 8.1.10 | describe the color coding of insulation | ✅ | • Teach Construction : Introduction to Electrical : Electrical Wiring Process • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation | |
| 8.1.11 | describe instrumentation control wiring | ❌ | no genuine match | |
| 8.1.12 | describe the equipment required for pulling wire through conduit | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation | |
| 8.1.13 | describe the procedure for pulling wire through conduit | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation | |
| 8.1.14 | install conductors in conduit; | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations | |
| 8.1.15 | pull conductors in a conduit system | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 07 - Conductor Selection and Installation • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations | |
| 9. The Student Learns Electrical Symbols And Their Use In Design Drawings. Additionally, S... | 9.1.1 | explain the basic layout of a design drawing | ✅ | • Teach Construction : Plan Reading for Construction : Scaling • Pointful Education : Architectural Design I : Architecture_01 Arch 02: Design and Drawings Part I • Pointful Education : Building Maintenance Technologies II : BuildMTII01: Construction Documents, Contracts, and Specifications • Core-LX : NCCER 08 - Construction Sequence and Trade Coordination NCCER Construction Technology Level 1 : NCCER 08 - Construction Sequence and Trade Coordination NCCER Construction Technology Level 1 • Core-LX : NCCER Construction Technology L1 : Construction Sequence and Trade Coordination (pending) |
| 9.1.2 | describe the information included in the title block of a drawing | ✅ | • TPC : TPC Industrial Fundamentals : 101 Reading Blueprints • TPC : TPC Welding Online Training : 416 Blueprint Reading for Welders • Open Textbooks : Machine Shop VESL : Machine Shop VESL: 06 Blueprint Reading • Core-LX : All Lessons : Blueprint Reading and Geometric Dimensioning and Tolerancing (GD&T) (pending) • Pointful Education : Architectural Design I : Architecture_01 Arch 01: Basic Drafting | |
| 9.1.3 | identify common symbols and the various types of lines used on drawings | ✅ | • Open Textbooks : Basic Blueprint Reading : Basic Blueprint Reading • TPC : TPC Industrial Fundamentals : 102 Reading Schematics and Symbols • Open Textbooks : Machine Shop VESL : Machine Shop VESL: 06 Blueprint Reading • Core-LX : Residential Carpentry : 08 Building Plans and Codes • Pointful Education : Architectural Design I : Architecture_01 Arch 01: Basic Drafting | |
| 9.1.4 | understand the use of architect's and engineer's scales | ✅ | • TPC : TPC Building & Grounds Maintenance : 361 Introduction to Carpentry • Pointful Education : Building Maintenance Technologies II : BuildMTII01: Construction Documents, Contracts, and Specifications • Core-LX : Plumbing 1 : Introduction to Plumbing Drawings • Certify ED : Carpentry (Video & VR) : Carpentry - Unit 02 - Fundamentals of Carpentry: Tools, Drawings, and Building Codes • Pointful Education : Architectural Design I : Architecture_01 Arch 01: Basic Drafting | |
| 9.1.5 | interpret electrical drawings such as site plans, floor plans, and detail drawings | ✅ | • Core-LX : All Lessons : NEC Code Navigation, Electrical Drawings, and Box Fill Calculations (pending) • Certify ED : Electrical (Video & VR) : Electrical - Unit 01 - Electrical Power Generation and Safety • Certify ED : HVAC 2 - (Video & VR) : HVAC 2 - Unit 02 - Lifting, Ladders, Heat Transfer, and Blueprint Reading • Pointful Education : Architectural Design II : Architecture_02 02: Basic Architectural Drawings Part II • Pointful Education : Architectural Design II : Architecture_02 06: Preparing Computer-Aided Drawings (CAD) Part I | |
| 9.1.6 | read equipment schedules found on electrical drawings; | ✅ | • Pointful Education : Architectural Design II : Architecture_02 02: Basic Architectural Drawings Part II • TPC : TPC Air Conditioning & Refrigeration Training : 439 System Troubleshooting • TPC : TPC Electrical Training Courses : 210 Electrical Troubleshooting • TPC : TPC Electrical Training Courses : 210 Electrical Troubleshooting • Core-LX : All Lessons : Electrical Fundamentals for Industrial Technicians (pending) | |
| 9.1.7 | describe the type of information included in electrical specifications | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 01 - Electrical Power Generation and Safety • Core-LX : NCCER 08 - Construction Sequence and Trade Coordination NCCER Construction Technology Level 1 : NCCER 08 - Construction Sequence and Trade Coordination NCCER Construction Technology Level 1 • Core-LX : All Lessons : NEC Code Navigation, Electrical Drawings, and Box Fill Calculations (pending) • Core-LX : NCCER 08 - Construction Sequence and Trade Coordination NCCER Construction Technology Level 1 : NCCER 08 - Construction Sequence and Trade Coordination NCCER Construction Technology Level 1 • Core-LX : NCCER Construction Technology L1 : Construction Sequence and Trade Coordination (pending) | |
| 10. The Student Learns The Electrical Devices And Wiring Techniques Used In Commercial And ... | 10.1.1 | identify and state the functions and ratings of special switches such as single-pole, double-pole, three-way, four-way, dimmer, and safety switches | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics • Open Textbooks : Basic Lighting for Electricians: Level 1 : Basic Lighting for Electricians: Level 1 07: Common Switches • Open Textbooks : Basic Lighting for Electricians: Level 1 : Basic Lighting for Electricians: Level 1 07: Common Switches • Certify ED : Electrical (Video & VR) : Electrical - Unit 10 - Three-Way and Four-Way Switching Circuits: Installation and Maintenance • Certify ED : Electrical (Video & VR) : Electrical - Unit 10 - Three-Way and Four-Way Switching Circuits: Installation and Maintenance |
| 10.1.2 | explain National Electrical Manufacturers Association classifications as they relate to switches and enclosures | ✅ | • TPC : TPC Electrical Training Courses : 1008 Introductory - ACDC Drives | |
| 10.1.3 | explain the National Electrical Building Code requirements concerning wiring devices | ✅ | • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER Electrical L1 : NEC Code Navigation (pending) | |
| 10.1.4 | identify and state the functions and ratings of wiring devices such as straight blade, twist lock, and pin and sleeve receptacles | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics | |
| 10.1.5 | identify and define receptacle terminals and disconnects | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics • TPC : TPC Industrial Fundamentals : 109 Industrial Safety and Health | |
| 10.1.6 | identify and define ground fault circuit interrupters | ✅ | • TPC : TPC Electrical Training Courses : 205.1 Electrical Safety and Protection - v2 • TPC : TPC Electrical Training Courses : 205.1 Electrical Safety and Protection - v2 • TPC : TPC Industrial Fundamentals : 109 Industrial Safety and Health • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques • Teach Construction : Introduction to Electrical : Electrical Materials | |
| 10.1.7 | explain the box mounting requirements in the National Building Code | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations • Core-LX : Labs : Branch Circuit Wiring and Service Panel Terminations (pending) • Core-LX : All Lessons : NEC Code Navigation, Electrical Drawings, and Box Fill Calculations (pending) | |
| 10.1.8 | use appropriate tools and connectors to strip and splice wires together | ✅ | • Teach Construction : Introduction to Electrical : Electrician's Hand Tools • Teach Construction : Introduction to Electrical : Electrical Wiring Process • Teach Construction : Introduction to Electrical : Electrical Wiring Process • Core-LX : Labs : Branch Circuit Wiring and Service Panel Terminations (pending) • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques | |
| 10.1.9 | identify and state the functions of limit switches and relays; | ✅ | • TPC : TPC Electrical Training Courses : 210 Electrical Troubleshooting • TPC : TPC Electrical Training Courses : 210 Electrical Troubleshooting • TPC : 331 Bulk-Handling Conveyors : 331 Bulk-Handling Conveyors | |
| 10.1.10 | identify and state the function of switchgear | ❌ | no genuine match | |
| 11. The Student Learns The Electrical Devices And Wiring Techniques Used In Residential Con... | 11.1.1 | describe how to determine electric service requirements for dwellings | ✅ | • Core-LX : NCCER 09 - Residential Systems Integration NCCER Construction Technology Level 1 : NCCER 09 - Residential Systems Integration NCCER Construction Technology Level 1 |
| 11.1.2 | explain the grounding requirements of a residential electric service | ✅ | • TPC : TPC Electrical Training Courses : 208 Three-Phase Systems • TPC : TPC Electrical Training Courses : 208 Three-Phase Systems • TPC : TPC Industrial Fundamentals : 109 Industrial Safety and Health • Certify ED : Construction Safety (OSHA) (Video & VR) : Construction Safety (OSHA) - Unit 24 - Electrical Safety and Power Tools • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 | |
| 11.1.3 | calculate and select service-entrance equipment | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 06 - Electrical System Sizing and Calculations • Core-LX : NCCER 09 - Residential Systems Integration NCCER Construction Technology Level 1 : NCCER 09 - Residential Systems Integration NCCER Construction Technology Level 1 | |
| 11.1.4 | select the proper wiring methods for various types of residences | ✅ | • Teach Construction : Introduction to Electrical : Electrical Materials • Core-LX : Labs : Branch Circuit Wiring and Service Panel Terminations (pending) | |
| 11.1.5 | explain the role of the National Electrical Code in residential wiring | ✅ | • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 • Core-LX : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 : NCCER 13 - NEC Code Navigation NCCER Electrical Level 1 | |
| 11.1.6 | compute branch circuit loads and explain their installation requirements | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 06 - Electrical System Sizing and Calculations • Core-LX : Labs : Branch Circuit Wiring and Service Panel Terminations (pending) • Core-LX : NCCER 09 - Residential Systems Integration NCCER Construction Technology Level 1 : NCCER 09 - Residential Systems Integration NCCER Construction Technology Level 1 | |
| 11.1.7 | explain the types and purposes of equipment grounding conductors | ✅ | • TPC : TPC Electrical Training Courses : 208 Three-Phase Systems • TPC : TPC Electrical Training Courses : 208 Three-Phase Systems • TPC : TPC Industrial Fundamentals : 109 Industrial Safety and Health • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 • TPC : TPC Electrical Training Courses : 211 Electrical Safety in the Workplace - Understanding NFPA 70E v2015 | |
| 11.1.8 | explain the purpose of ground-fault circuit interrupters and tell where they must be installed | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 05 - Electrical Tools, Equipment, Materials, and Testing Techniques • TPC : TPC Electrical Training Courses : 205.1 Electrical Safety and Protection - v2 • TPC : TPC Electrical Training Courses : 205.1 Electrical Safety and Protection - v2 • TPC : TPC Industrial Fundamentals : 109 Industrial Safety and Health • TPC : TPC Industrial Fundamentals : 109 Industrial Safety and Health | |
| 11.1.9 | determine the size of outlet boxes and select the proper type for different wiring methods | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 08 - Electrical Components and Installations • Core-LX : Labs : Branch Circuit Wiring and Service Panel Terminations (pending) | |
| 11.1.10 | describe rules for installing electric space heating and heating, ventilating, and air conditioning equipment | ❌ | no genuine match | |
| 11.1.11 | describe the installation rules for electrical systems around swimming pools, spas, and hot tubs | ❌ | no genuine match | |
| 11.1.12 | describe the installation and control of lighting fixtures; | ✅ | • Open Textbooks : Basic Lighting for Electricians: Level 1 : Basic Lighting for Electricians: Level 1 06: Edison Screw Bases • Open Textbooks : Basic Lighting for Electricians: Level 1 : Basic Lighting for Electricians: Level 1 07: Common Switches • Open Textbooks : Basic Lighting for Electricians: Level 1 : Basic Lighting for Electricians: Level 1 07: Common Switches • Open Textbooks : Basic Lighting for Electricians: Level 1 : Basic Lighting for Electricians: Level 1 07: Common Switches • Open Textbooks : Basic Lighting for Electricians: Level 1 : Basic Lighting for Electricians: Level 1 08: Common Switching Circuits | |
| 11.1.13 | explain how wiring devices are selected and installed | ✅ | • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics • Certify ED : Electrical (Video & VR) : Electrical - Unit 09 - Switches, Receptacles, and Dimmers: Residential Wiring Basics |
Coverage Summary
Core-LX delivers strong coverage of this TEKS course at 90% of sub-standards aligned.
Primary publishers contributing alignment: Certify ED (92), TPC (87), Core-LX (74), Pointful Education (15), Teach Construction (15).
Gap-closure roadmap (9 sub-standards not yet aligned, grouped by strand):
- Strand 6. The Student Uses The National Electrical Code. The Student Is Expected To:: 1 sub-standard(s) — candidate for a focused Gap Lesson
- Strand 7. The Student Learns The Types And Applications Of Raceways, Wireways, And Ducts. The Stu...: 4 sub-standard(s) — candidate for a focused Gap Lesson
- Strand 8. The Student Learns The Types And Applications Of Conductors And Wiring Techniques. The ...: 1 sub-standard(s) — candidate for a focused Gap Lesson
- Strand 10. The Student Learns The Electrical Devices And Wiring Techniques Used In Commercial And ...: 1 sub-standard(s) — candidate for a focused Gap Lesson
- Strand 11. The Student Learns The Electrical Devices And Wiring Techniques Used In Residential Con...: 2 sub-standard(s) — candidate for a focused Gap Lesson
Eligible for Gap Lesson / Gap Lab generation — coverage exceeds the 85% threshold; any remaining sub-standard gaps will be closed by auto-generated lessons in the next pipeline phase.
Want to see this in your LMS?
Every badge above is deliverable through Canvas, Moodle, D2L, Blackboard, or any LTI-compatible LMS.
Schedule a Demo