Back to Standards Coverage
Precision Metal Manufacturing II Lab
Manufacturing · Texas TEKS
| Strand | Standard ID | Standard Statement | Covered? | CLX Match List |
|---|---|---|---|---|
| 1. The Student Demonstrates Professional Standards/Employability Skills As Required By Bus... | 1.1.1 | express ideas to others in a clear, concise, and effective manner through written and verbal communication | ✅ | • Pointful Education : Communication Skills for Business : Communication Skills for Business 03: Effective Communication Strategies Part II • Pointful Education : Communication Skills for Business : Communication Skills for Business 03: Effective Communication Strategies Part II • Certify ED : Nursing Assistant (Video & VR) : Nursing Assistant - Unit 02 - Patient Communication • TPC : TPC Maintenance Supervisor : 905 Effective Communication for Supervisors • Medcerts : Medical Coder & Biller Certification Course : Professionalism in Allied Health (v21.12) PS1011 |
| 1.1.2 | convey written information that is easily understandable to others | ✅ | • Pointful Education : Communication Skills for Business : Communication Skills for Business 03: Effective Communication Strategies Part II • Pointful Education : Communication Skills for Business : Communication Skills for Business 03: Effective Communication Strategies Part II • Pointful Education : Communication Skills for Business : Communication Skills for Business 05: Best Practices for Creating Business Deliverables Part II • Pointful Education : Communication Skills for Business : Communication Skills for Business 07: Receiving Communications • Medcerts : Medical Coder & Biller Certification Course : Professionalism in Allied Health (v21.12) PS1011 | |
| 1.1.3 | demonstrate acceptable work ethics in reporting for duty and performing assigned tasks as directed | ✅ | • Certify ED : Hospitality Management : Hospitality - Unit 08 - Legal and Operational Considerations • Certify ED : Medical Assistant : Medical Assistant - Unit 40 - Legal Standards and Medication Safety • Medcerts : NASM Personal Trainer and Nutrition Coach - HF 3000 : NASM's Essentials of Personal Fitness Training (v22.10) HF3011 • HVACR.EDU : HVACR Ready to Work (RTW) Program : 01 Employability Skills: 010-2 Personal Work Habits Module • HVACR.EDU : HVACR Ready to Work (RTW) Program : 010 Employability Skills | |
| 1.1.4 | conduct oneself in a manner acceptable for the profession and work site such as suitable dress and polite speech | ✅ | • Certify ED : Hospitality Management : Hospitality - Unit 08 - Legal and Operational Considerations • Pointful Education : Communication Skills for Business : Communication Skills for Business 01: Basic Communication Principles • HVACR.EDU : HVACR Ready to Work (RTW) Program : 01 Employability Skills: 010-2 Personal Work Habits Module • HVACR.EDU : HVACR Ready to Work (RTW) Program : 010 Employability Skills • HVACR.EDU : HVACR Ready to Work (RTW) Program : 010 Employability Skills | |
| 1.1.5 | choose the ethical course of action and comply with all applicable rules, laws, and regulations | ✅ | • Medcerts : NASM Personal Trainer and Nutrition Coach - HF 3000 : NASM's Essentials of Personal Fitness Training (v22.10) HF3011 • Certify ED : Medical Assistant : Medical Assistant - Unit 40 - Legal Standards and Medication Safety • Certify ED : Medical Assistant : Medical Assistant - Unit 40 - Legal Standards and Medication Safety • Medcerts : Medical Coder & Biller Certification Course : Insurance and Billing, and Coding Essentials (v24.7) HI1015 • Open Textbooks : Fundamentals of Business, 4th edition : Fundamentals of Business: Chapter 04 Ethics and Social Responsibility | |
| 1.1.6 | review with a critical eye the fine, detailed aspects of both quantitative and qualitative work processes and end products | ✅ | • Core-LX : Transitioning to Quality Online Teaching (MASTER) : Final Assignment • Core-LX : Transitioning to Quality Online Teaching (MASTER) : Introduction to the Course • Open Textbooks : Digital Media Production : Digital Media Production - Unit 28 - Business Media and Problem-Solving • Core-LX : Plumbing 1 : Introduction to Drain, Waste, and Vent (DWV) Systems • Open Textbooks : Building Maintenance & Construction: Tools and Maintenance Tasks : CON 01: BM&C: Tools and Maintenance Tasks 04: Plumbing Systems | |
| 1.1.7 | evaluate systems and operations; identify causes, problems, patterns, or issues; and explore workable solutions or remedies to improve situations | ✅ | • Open Textbooks : Digital Media Production : Digital Media Production - Unit 28 - Business Media and Problem-Solving • Open Textbooks : Introduction to Criminal Investigation: Processes, Practices and Thinking : Introduction to Criminal Investigation: Processes, Practices and Thinking • Open Textbooks : Introduction to Criminal Investigation: Processes, Practices and Thinking : Introduction to Criminal Investigation: Processes, Practices and Thinking • Pointful Education : Project Management : ProjMgmt 02: Project Management Planning Part I • Gittel Grant : Unit 4: Robotics and Automation : Unit 4: Robotics and Automation: Lesson 19-20 | |
| 1.1.8 | follow written and oral instructions and adhere to established business practices, policies, and procedures, including health and safety rules; | ✅ | • Certify ED : Hospitality Management : Hospitality - Unit 08 - Legal and Operational Considerations • Pointful Education : Building Maintenance Technologies : BuildMT 01: Health, Safety, and Environmental Management Systems • Pointful Education : Building Maintenance Technologies : BuildMT 01: Health, Safety, and Environmental Management Systems • Certify ED : Early Childhood Education (Video & VR) : Early Childhood Education - Unit 11 - Safety and Emergency Procedures • Certify ED : Agricultural Science (Video & VR) : Agricultural Science - Unit 10 - Workplace and Food Safety | |
| 1.1.9 | prioritize tasks, follow schedules, and work on goal-relevant activities in a way that uses time wisely in an effective, efficient manner | ✅ | • Pointful Education : Project Management : ProjMgmt 02: Project Management Planning Part I • Open Textbooks : Fundamentals of Building Construction Management : CON 02 Fundamentals of Building Construction Management 14: Introduction to Project Scheduling • Certify ED : Early Childhood Education (Video & VR) : Early Childhood Education - Unit 36 - Daily Schedules and Transitions • Open Textbooks : Current & Emerging Computing Technology : Current & Emerging Computing Technology: 11 Staying Organized • Core-LX : NCCER 08 - Construction Sequence and Trade Coordination NCCER Construction Technology Level 1 : NCCER 08 - Construction Sequence and Trade Coordination NCCER Construction Technology Level 1 | |
| 2. The Student Builds On The Manual Machining Skills Gained In Precision Metal Manufacturi... | 2.1.1 | develop a detailed turning part such as the National Institute for Metalworking Skills (NIMS) Level 1 turning, chucking, or turning between centers part with zero defects (100% to the print) in a safe manner; | ✅ | • TPC : TPC Machine Shop Practices : 324 Lathe-Turning Work Between Centers • TPC : TPC Machine Shop Practices : 324 Lathe-Turning Work Between Centers • TPC : TPC Machine Shop Practices : 324 Lathe-Turning Work Between Centers • TPC : TPC Machine Shop Practices : 324 Lathe-Turning Work Between Centers • TPC : TPC Machine Shop Practices : 324 Lathe-Turning Work Between Centers |
| 2.1.2 | develop a detailed milling part such as the NIMS Level 1 milling part with zero defects (100% to the print) in a safe manner | ✅ | • TPC : TPC Machine Shop Practices : 326 Basic Milling Procedures • TPC : TPC Machine Shop Practices : 326 Basic Milling Procedures • TPC : TPC Machine Shop Practices : 326 Basic Milling Procedures • TPC : TPC Machine Shop Practices : 326 Basic Milling Procedures • Open Textbooks : Machine Shop Fundamentals : Machine Shop Fundamentals: 03 Milling Machines | |
| 3. The Student Evaluates Tool Changing And Tool Offset Registers In A Computer Numerical C... | 3.1.1 | perform various types of tool changes | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) |
| 3.1.2 | demonstrate quick change tooling used on CNC milling machines | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center | |
| 3.1.3 | demonstrate appropriate tool storage | ✅ | • CLX : Automotive Basics : Service and Safety: Tools and Equipment • Core-LX : Plumbing 1 : Plumbing Tools of the Trade • Core-LX : Plumbing 1 : Plumbing Tools of the Trade | |
| 3.1.4 | demonstrate the proper use of tool offset registers | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC02: Lesson 2 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC02: Lesson 2 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS | |
| 3.1.5 | determine tool offset length; | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS • Core-LX : Labs : CNC Mill Setup: WCS, Tool Offsets, and First-Part Verification (pending) | |
| 3.1.6 | enter tool offsets for a set up | ✅ | • Core-LX : Labs : CNC Mill Setup: WCS, Tool Offsets, and First-Part Verification (pending) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC02: Lesson 2 IMTL-136 Workbook | |
| 4. The Student Operates A Cnc Lathe. The Student Is Expected To: | 4.1.1 | use equipment commonly found on and around a CNC lathe in a safe manner | ✅ | • Open Textbooks : Machine Shop Fundamentals : Machine Shop Fundamentals: 02 Engine Lathes • Open Textbooks : Machine Shop Fundamentals : Machine Shop Fundamentals: 02 Engine Lathes • Core-LX : Residential Carpentry : 01 Job Site Safety • Core-LX : Residential Carpentry : 02 Job Site Safety 2 of 2 • Open Textbooks : Building Maintenance & Construction: Tools and Maintenance Tasks : CON 01: BM&C: Tools and Maintenance Tasks 01: Safety |
| 4.1.2 | recognize, name, and describe the function of the primary components of a CNC lathe | ✅ | • Open Textbooks : Support for CNC : CNC08: Lesson 8: IMTL-153 Turning Machines • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2009 The CNC Controller for a CNC Machining Center • TPC : TPC Ammonia Refrigeration : 461 Ammonia Refrigeration Basics • TPC : 501 Introduction to Industrial Robotics : 501 Introduction to Robotics | |
| 4.1.3 | perform preventative maintenance checks on a CNC lathe such as checking all fluid levels, system pressure, tooling wear, and component lubrication and cleaning | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CNC-4015 Maintenance Tasks for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2010 Auxiliary Systems for a CNC Machining Center • TPC : TPC Mechanical Maintenance Applications : 342 Mechanical and Fluid Drive Systems • TPC : 331 Bulk-Handling Conveyors : 331 Bulk-Handling Conveyors | |
| 4.1.4 | test the coolant for proper density and adjust accordingly in order to reach the correct mixture | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CUT-2008 Cutting Fluids | |
| 4.1.5 | perform a power up on a standard CNC lathe | ✅ | • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) | |
| 4.1.6 | demonstrate the use of the jog controls on the operator panel to jog the lathe's axes | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2009 The CNC Controller for a CNC Machining Center • Open Textbooks : Machine Shop Fundamentals : Machine Shop Fundamentals: 02 Engine Lathes • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook | |
| 4.1.7 | demonstrate the ability to locate, assemble, and measure tooling according to work instructions and job documentation | ✅ | • Open Textbooks : Support for CNC : CNC02: Lesson 2 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC07: Lesson 7: IMTL-153 Mills • Core-LX : Labs : CNC Mill Setup: WCS, Tool Offsets, and First-Part Verification (pending) | |
| 4.1.8 | install tools and tool holders in the automatic tool changer locations according to work instructions and job documentation | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center | |
| 4.1.9 | locate and set workpiece to zero on a CNC lathe | ✅ | • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2007 CNC Machining Center Movements | |
| 4.1.10 | set any required work offsets for the part to be machined after a basic tool setting process has been completed | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) | |
| 4.1.11 | set the proper geometry/tool offsets for each tool in a standard tool setting process | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC02: Lesson 2 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) | |
| 4.1.12 | operate a CNC lathe in automatic mode; | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Core-LX : All Lessons : Fusion 360 CAM: Toolpaths, Feeds and Speeds, and Simulation (pending) | |
| 4.1.13 | illustrate the proper power down process on a CNC lathe | ✅ | • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) | |
| 5. The Student Operates A Cnc Mill. The Student Is Expected To: | 5.1.1 | use equipment commonly found on and around a CNC mill in a safe manner | ✅ | • CLX : Automotive Basics : Service and Safety: Tools and Equipment • Certify ED : Construction Safety (OSHA) (Video & VR) : Construction Safety (OSHA) - Unit 24 - Electrical Safety and Power Tools • CLX : Automotive Basics : Service and Safety: Shop and Personal Safety • Certify ED : Welding (Video & VR) : Welding - Unit 06 - Personal Protective Equipment • Certify ED : Welding (Video & VR) : Welding - Unit 06 - Personal Protective Equipment |
| 5.1.2 | recognize, name, and describe the function of the primary components of a CNC mill | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2009 The CNC Controller for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center | |
| 5.1.3 | perform preventative maintenance checks on a CNC mill such as checking all fluid levels, system pressure, tooling wear, and component lubrication and cleaning | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CNC-4015 Maintenance Tasks for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2010 Auxiliary Systems for a CNC Machining Center • TPC : 331 Bulk-Handling Conveyors : 331 Bulk-Handling Conveyors • TPC : TPC Mechanical Maintenance Applications : 342 Mechanical and Fluid Drive Systems • Certify ED : HVAC 2 - (Video & VR) : HVAC 2 - Unit 05 - Gas and Oil Heating Systems: Components, Maintenance, and Troubleshooting | |
| 5.1.4 | test the coolant for proper density and adjust accordingly in order to reach the correct mixture | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CUT-2008 Cutting Fluids | |
| 5.1.5 | perform a power up on a standard CNC mill | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook | |
| 5.1.6 | demonstrate the use of the jog controls on the operator panel to jog the mill's axes | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2009 The CNC Controller for a CNC Machining Center • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) | |
| 5.1.7 | demonstrate the ability to locate, assemble, and measure tooling using a presetter or other means according to work instructions and job documentation | ✅ | • Core-LX : All Lessons : Fusion 360 CAM: Toolpaths, Feeds and Speeds, and Simulation (pending) • Open Textbooks : Support for CNC : CNC02: Lesson 2 IMTL-136 Workbook • TPC : TPC Industrial Fundamentals : 104 Making Measurements | |
| 5.1.8 | install tools and tool holders in the automatic tool changer locations according to work instructions and job documentation | ✅ | • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2008 Workpiece and Tool Holding Devices for a CNC Machining Center • WorkForge : CNC Machining Center Operator - Level 1 : CNC-2007 CNC Machining Center Movements | |
| 5.1.9 | locate and set workpiece to zero on a CNC mill | ✅ | • Core-LX : Labs : CNC Mill Setup: WCS, Tool Offsets, and First-Part Verification (pending) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook | |
| 5.1.10 | set any required work offsets for the part to be machined after a basic tool setting process has been completed | ✅ | • Core-LX : Labs : CNC Mill Setup: WCS, Tool Offsets, and First-Part Verification (pending) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook | |
| 5.1.11 | set the proper geometry/tool offsets for each tool in a standard tool setting process | ✅ | • Core-LX : Labs : CNC Mill Setup: WCS, Tool Offsets, and First-Part Verification (pending) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC02: Lesson 2 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) | |
| 5.1.12 | operate a CNC mill in automatic mode; | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) | |
| 5.1.13 | illustrate the proper power down process on a CNC mill | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS | |
| 6. The Student Learns To Manually Program A Cnc Lathe Without The Help Of Computer-Aided D... | 6.1.1 | use trigonometry to determine coordinates from technical drawings to cut arcs and angles | ✅ | • OpenStax : CK-12 Geometry : 8.6 Section 8.6: Inverse Trigonometric Ratios (pending) • OpenStax : CK-12 Geometry : 8.7 Section 8.7: Extension: Laws of Sines and Cosines (pending) • Core-LX : CK-12 Basic Geometry Concepts : CK-12 Basic Geometry Concepts • Chapter 08 - Right Triangles and Trigonometry • Core-LX : CK-12 Basic Geometry Concepts : CK-12 Basic Geometry Concepts • Chapter 08 - Right Triangles and Trigonometry • Open Textbooks : Introductory Algebra : Intro Algebra: 09 Trigonometry |
| 6.1.2 | use trigonometry for determining cutter offsets | ✅ | • OpenStax : CK-12 Geometry : 8.6 Section 8.6: Inverse Trigonometric Ratios (pending) • Core-LX : CK-12 Basic Geometry Concepts : CK-12 Basic Geometry Concepts • Chapter 08 - Right Triangles and Trigonometry • Open Textbooks : Math for Trades: Volume 3 : Math for Trades Volume III: 04 Trigonometry • Open Textbooks : Machine Shop Fundamentals : Machine Shop Fundamentals: 02 Engine Lathes | |
| 6.1.3 | use appropriate mathematical skills to solve problems while programming a CNC lathe | ✅ | • Open Textbooks : Trades Access Common Core: Employability Skills : TACC Employability Skils: 01 Studying • Open Textbooks : Machine Shop VESL : Machine Shop VESL: 04 Basic Math • Open Textbooks : Fundamentals of Math, Physics, and Statistics for Future Transportation Professionals : FMPS: 01 Trigonometry Functions and Geometric Measurements • OpenStax : Prealgebra 2e : 9.1 Use a Problem Solving Strategy (pending) • OpenStax : Elementary Algebra 2e : 3.1 Use a Problem-Solving Strategy (pending) | |
| 6.1.4 | write a simple program to face and turn | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook | |
| 6.1.5 | write a simple program to cut radiuses, angles, grooves, and threads | ✅ | • Open Textbooks : Support for CNC : CNC05: Lesson 5 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC05: Lesson 5 IMTL-136 Workbook • Open Textbooks : Machine Shop Fundamentals : Machine Shop Fundamentals: 02 Engine Lathes • Open Textbooks : Machine Shop Fundamentals : Machine Shop Fundamentals: 02 Engine Lathes | |
| 6.1.6 | write a program using cutter radius compensation | ✅ | • Open Textbooks : Support for CNC : CNC06: Lesson 6 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC06: Lesson 6 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS | |
| 6.1.7 | write a program using canned cycles such as G71; | ✅ | • Open Textbooks : Support for CNC : CNC07: Lesson 7: IMTL-153 Mills | |
| 6.1.8 | write a program and produce a complex part such as a NIMS Level 1 CNC lathe part with zero defects | ✅ | • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Core-LX : Labs : CNC Mill Setup: WCS, Tool Offsets, and First-Part Verification (pending) | |
| 7. The Student Learns To Manually Program A Cnc Mill (Without The Help Of Cad/Cam Software... | 7.1.1 | use trigonometry to determine coordinates from technical drawings to cut arcs and angles | ✅ | • OpenStax : CK-12 Geometry : 8.6 Section 8.6: Inverse Trigonometric Ratios (pending) • OpenStax : CK-12 Geometry : 8.7 Section 8.7: Extension: Laws of Sines and Cosines (pending) • OpenStax : Precalculus 2e : Section 5.4: Right Triangle Trigonometry (pending) • Core-LX : CK-12 Basic Geometry Concepts : CK-12 Basic Geometry Concepts • Chapter 08 - Right Triangles and Trigonometry • Core-LX : CK-12 Basic Geometry Concepts : CK-12 Basic Geometry Concepts • Chapter 08 - Right Triangles and Trigonometry |
| 7.1.2 | use trigonometry to determine cutter offsets | ✅ | • OpenStax : CK-12 Geometry : 8.6 Section 8.6: Inverse Trigonometric Ratios (pending) • OpenStax : CK-12 Geometry : 8.7 Section 8.7: Extension: Laws of Sines and Cosines (pending) • OpenStax : Precalculus 2e : Section 5.4: Right Triangle Trigonometry (pending) • Core-LX : CK-12 Basic Geometry Concepts : CK-12 Basic Geometry Concepts • Chapter 08 - Right Triangles and Trigonometry • Core-LX : CK-12 Basic Geometry Concepts : CK-12 Basic Geometry Concepts • Chapter 08 - Right Triangles and Trigonometry | |
| 7.1.3 | use appropriate mathematical skills to solve problems while programming a CNC lathe | ✅ | • Open Textbooks : Trades Access Common Core: Employability Skills : TACC Employability Skils: 01 Studying • Open Textbooks : Machine Shop VESL : Machine Shop VESL: 04 Basic Math • Open Textbooks : Math for Trades: Volume 3 : Math for Trades Volume III: 04 Trigonometry • Core-LX : Precalculus 2e : Precalculus 2e - Chapter 05: Trigonometric Functions • OpenStax : Precalculus 2e : Section 5.4: Right Triangle Trigonometry (pending) | |
| 7.1.4 | write a simple program to perform hole operations | ✅ | • Open Textbooks : Support for CNC : CNC07: Lesson 7: IMTL-153 Mills • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) | |
| 7.1.5 | write a simple program to cut radiuses and angles | ✅ | • Open Textbooks : Support for CNC : CNC05: Lesson 5 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC05: Lesson 5 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC01: Lesson 1 IMTL-136 Workbook • OpenStax : CK-12 Geometry : 8.6 Section 8.6: Inverse Trigonometric Ratios (pending) • OpenStax : CK-12 Geometry : 8.7 Section 8.7: Extension: Laws of Sines and Cosines (pending) | |
| 7.1.6 | write a program using cutter radius compensation and ramping; | ✅ | • Open Textbooks : Support for CNC : CNC06: Lesson 6 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC06: Lesson 6 IMTL-136 Workbook • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS • Open Textbooks : Support for CNC : CNC07: Lesson 7: IMTL-153 Mills • Open Textbooks : Support for CNC : CNC05: Lesson 5 IMTL-136 Workbook | |
| 7.1.7 | write a program and produce a complex part such as a NIMS Level 1 CNC milling part with zero defects | ✅ | • Open Textbooks : Support for CNC : CNC07: Lesson 7: IMTL-153 Mills • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC00: Introduction to Computer Numerical Control (CNC) • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS • Open Textbooks : Support for CNC : CNC09: Lesson 9: HAAS |
Coverage Summary
Core-LX delivers strong coverage of this TEKS course at 100% of sub-standards aligned.
Primary publishers contributing alignment: Open Textbooks (101), WorkForge (26), Core-LX (25), TPC (17), Certify ED (14).
No open gaps. All sub-standards have at least one genuine Core-LX badge match.
Eligible for Gap Lesson / Gap Lab generation — coverage exceeds the 85% threshold; any remaining sub-standard gaps will be closed by auto-generated lessons in the next pipeline phase.
Want to see this in your LMS?
Every badge above is deliverable through Canvas, Moodle, D2L, Blackboard, or any LTI-compatible LMS.
Schedule a Demo